HAZARDOUS
LIGHTING SOLUTIONS
Heliport, Helideck & Obstruction Lighting Solutions for areas with hazardous atmospheres.
Point Lighting manufactures Class I, Division 2; ATEX & IECEx products and systems.
Choose from our products by application or contact Point Lighting for a site specific solution.
ATEX & IECEX ZONE 1 & 2 STATUS LIGHT SYSTEM
For emergency wave-off on a marine helideck
Available as Class I, Division 2
HAZARDOUS AREA OBSTRUCTION LIGHTING
Point Lighting has decades of experience supplying aviation obstruction lighting systems including controls for severe and classified installations such as flare stacks, refineries, grain mills and chemical processing plants. Today such FAA and ICAO lighting are all LED products to IECEx, ATEX and Class I, Division 2. Point Lighting has designed Solutions for Obstruction Lighting and can be found below:
| DESIGNED SOLUTIONS FOR OBSTRUCTION LIGHTING | DOWNLOAD | DOWNLOAD |
|---|---|---|
| TYPICAL PROCESS PLANT STRUCTURE | SKETCH OL3 | SKETCH OL3 BILL OF MATERIAL |
| TYPICAL FLARE STACK | SKETCH OL4 | SKETCH OL4 BILL OF MATERIAL |
LOW INTENSITY OBSTRUCTION LIGHTS, MEDIUM INTENSITY OBSTRUCTION BEACONS and HAZARDOUS LOCATION SYSTEM CONTROLLERS
HAZARDOUS AREA HELIPORT & HELIDECK LIGHTING
Point Lighting was the first full line US manufacturer of LED heliport lighting in the early 2000’s. We have been hazardous area listed by Intertek since 2007. Today we are listed to IECEx, ATEX and Class I, Division 2, and installed on rigs, platforms, vessels and other hazardous locations around the world.
| DESIGNED SOLUTIONS FOR Helidecks | DOWNLOAD | DOWNLOAD |
|---|---|---|
| Typical HSAC IOGP Marine Helideck | SKETCH 4 | SKETCH 4 BILL OF MATERIAL |
HELIPORT & HELIDECK PERIMETER LIGHTS and
HELIPORT & HELIDECK SURFACE FLOODLIGHTS
HELIPORT & HELIDECK APPROACH GUIDANCE
Get In Touch
Point Lighting Corporation personnel will assist customers and their agents in the design of lighting layouts, equipment selection and specifications. In all cases, this represents our interpretation of applicable standards and common practices. No fee is charged for these opinions. Final equipment selection is the responsibility of the end user and to comply with all applicable laws and codes and to ensure proper installation.
