Obstruction
Lights

POL (LED) FEATURES

  • The castings are copper-free (< 0.25%) aluminum
  • The hardware is 316 (A4) stainless steel
  • Extensive mounting options available
  • Variable brightness option available
  • The lens is glass
  • The LED’s are rated for 100,000 hours
  • UL 1598A Marine Vessels tested and listed
  • NVG compatibility
  • Standard with the exclusive Point Lighting Marine Treatment finish that is bonded to the metal and far exceeds the corrosion resistance of the standard FAA approved finish
  • Six (6) years limited warranty subject to Point Lighting “Terms & Conditions of Sale”

POL-21005 LED single obstruction light

  • Safe area LED FAA L-810 & ICAO low intensity Types A & B
  • For prominent structures & towers that require alarm monitoring

POL-21005 LED double obstruction light

  • Safe area LED FAA L-810 & ICAO low intensity Types A & B
  • For prominent structures & towers that require alarm monitoring

POL-22001 LED single obstruction light

  • Safe area LED FAA L-810 & ICAO low intensity Types A & B
  • For structures that do not require alarm monitoring

POL-22001 LED double obstruction light

  • Safe area LED FAA L-810 & ICAO low intensity Types A & B
  • For structures that do not require alarm monitoring

POL-21005-EX Hazardous area Class I, Division 2 obstruction light

  • CID2 LED FAA L-810 & ICAO low intensity Types A & B
  • Hazardous area for refineries, process plant & offshore marine sites

PL11282-1 Hazardous area ATEX-IECEx obstruction light

  • POL-AX zones 1 & 2 ICAO low intensity Types A & B
  • Hazardous area for refineries, process plant & offshore marine sites

POL-22001-SOL Portable or permanent solar powered LED obstruction light

  • Safe area LED FAA L-810 & ICAO low intensity Types A & B
  • For locations without access to AC power wiring

SOL Solar powered LED obstruction lighting system

  • A custom packaged system solution for solar powered obstruction lighting
  • For a location needing a low & medium intensity system

SOL Solar powered LED obstruction lighting system

  • A custom packaged system solution for solar powered obstruction lighting
  •  For a location needing multiple low intensity lights on on system
  • For severe high heat conditions such as flare stacks & process structures

PEL-57005-C055 Multipurpose industrial warning lights

  • Hazardous area or safe area LED steady or flashing
  • Class I, Division 2 for hazardous area industrial sites

POL-21005 Infrared + Visible Red tactical obstruction light

  • Safe area LED FAA L-810 in olive drab marine treatment
  • Separately switched heads for normal & “lights out” conditions

POL-20000 single obstruction light with Edison lamps

  • Safe area incandescent FAA L-810 & ICAO low intensity Types A & B
  • For structures & towers using traditional alarm current monitoring

POL-20000 double obstruction light with Edison lamps

  • Safe area incandescent FAA L-810 & ICAO low intensity Types A & B
  • For structures & towers using traditional alarm current monitoring

Get In Touch

Point Lighting Corporation personnel will assist customers and their agents in the design of lighting layouts, equipment selection and specifications. In all cases, this represents our interpretation of applicable standards and common practices. No fee is charged for these opinions. Final equipment selection is the responsibility of the end user and to comply with all applicable laws and codes and to ensure proper installation.