Obstruction
PFB-37004 LED FEATURES
Used for dual systems, white systems, wind turbines & standalone beacons.
- The body and lens castings are non-metallic.
- FAA photocontrol is onboard or external.
- GPS synchronization is onboard.
- May require a data cable.
- Intertek tested and verified to FAA standards.
- The hardware is 316 (A4) stainless steel.
- Three (3) to six (6) years limited warranty subject to Point Lighting “Terms & Conditions of Sale”
PFB-37003 LED FEATURES
Used for red, night only systems & standalone red beacons. Data cable is usually not required.
- The casting and lens are molded plastic
- Standard with onboard FAA photocontrol
- Spares are field programmable
- Standard with onboard GPS synchronization
- NVG Compatible
- The hardware is 316 (A4) stainless steel
- Six (6) years limited warranty subject to Point Lighting “Terms & Conditions of Sale”
MEDIUM INTENSITY
PFB-37004 LED red, white & dual flashing obstruction beacon
- Safe area LED FAA L-864, L-865 & ICAO medium intensity Types A, B & C
- For prominent structures, buildings & towers
PFB-37003 LED red flashing & steady obstruction beacon
- Safe area LED FAA L-864 & ICAO medium intensity Types B & 3
- For prominent structures, buildings & towers
PFB-37003-SOL Solar powered red flashing obstruction beacon
- Safe area LED FAA L-864 & ICAO medium intensity Type B
- For prominent structures, buildings & towers
PFB-37004 LED white flashing obstruction beacon
- Safe area LED FAA L-865 & ICAO medium intensity Type A
- For prominent structures, buildings & towers
PFB-37002-EX Hazardous area Class I, Division 2 red beacon
- CID2 LED FAA L-864 & ICAO medium intensity Types B & C
- Hazardous area for refineries, process plant & offshore marine sites
PFB-37002-EX Hazardous area Class I, Division 2 white beacon
- CID2 LED FAA L-864 & ICAO medium intensity Type A
- Hazardous area for refineries, process plant & offshore marine sites
PFB-37004 LED dual red-white obstruction beacon
- Safe area LED FAA L-864/865 & ICAO medium intensity Types A & B
- For prominent structures, buildings & towers
PFB-37002-EX Class I, Division 2 dual red-white obstruction beacon
- CID2 LED FAA L-864/865 & ICAO medium intensity Types A & B
- Hazardous area for refineries, process plant & offshore marine sites
PFB-37002-AX Hazardous area ATEX red beacon
- LED FAA L-864 & ICAO medium intensity Types B & C
- ATEX & IECEx zones 1 & 2
- Hazardous area for refineries, process plant & offshore marine sites
HIGH INTENSITY
HIGH INTENSITY
- PFB-38111 LED white flashing 270,000 candelas obstruction beacon
- FAA L-856 & ICAO high intensity Type A
- For prominent structures, buildings over 700-ft & tall towers
HEAT SHIELDS
- PL40139 Heat Shield
- Stainless steel face & back with rigid alumina fiber matrix
- For severe high heat conditions such as flare stacks & process structures
Get In Touch
Point Lighting Corporation personnel will assist customers and their agents in the design of lighting layouts, equipment selection and specifications. In all cases, this represents our interpretation of applicable standards and common practices. No fee is charged for these opinions. Final equipment selection is the responsibility of the end user and to comply with all applicable laws and codes and to ensure proper installation.
